Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides. Continuous hot dipping, or electro-galvanizing are the two processes used to produce galvanized sheet and coil. Generally speaking, the hot dip process consists of passing the steel through a bath of molten zinc. The electro-galvanizing process consists of the application of zinc by electrolytic disposition. The result is a layer of zinc tightly adhering to the base metal through an iron-zinc bonding layer. Our hot-dipped galvanized products are manufacturerd to ASTM A653 specifications while our electrogalvanized products conform to ASTM A879 specifications.

A zinc coating is one of the most effective and economical methods of protecting bare steel from a corroding environment. The zinc not only serves as a barrier between the steel and the environment, it will sacrifice itself to protect the underlying steel sheet. Sacrificial, or galvanic protection occurs when two dissimilar metals are in contact and coupled with water and oxygen. Zinc corrodes preferentially to the iron in steel. This protection prevents corrosion of the steel at areas not covered with zinc. Thus, the spread of corrosion from cut edges, drill holes, etc. is minimized.

Material Types for Galvanized Coil and Sheet Steel

•Commercial Steel (CS Types A, B, and C)

•Forming Steel (FS Types A and B)

•Deep Drawing Steel (DDS Types A and C)

•Extra Deep Drawing Steel (EDDS)

•Structural Steel (SS) – further designated by Grades (33,37,40,50,80)

•High Strength Low Alloy Steel (HSLAS)

In addition, the Hot Dipped Galvanized as well as the Galvannealed products are available in a variety of coating weights including G-90, G-60, G-40, and G-30 for the Hot Dipped Galvanized products, and A-60 and A-40 for the Galvannealed products.

Typical Applications for Galvanized Coil and Steel Sheets

•Exterior building products

•Ductwork,

•HVAC products,

•Flashing,

•Electrical boxes and other electrical products,

•Roofing,

•Doors,

•Sashes,

•Automotive parts,

•Appliances,

•Commercial and residential steel framing,

•Parking lots

•Truss plates,

•Metal building purlins,

•and any other products requiring a corrosion resistant material.

Characteristics:

Product Specification:

Basic Substrate: Cold Rolled HDG/Galvalume

Quality: CQ  DQ

Color Standard: Acc to Ral Color Standard or customer's color sample

Applications: HDG product can be used in automobile, home appliances,medical Instruments, machinery industries, etc.

Technical Data of Hot Dipped Galvanized products: